Dealing with a dent in your brand-new car can be super frustrating. Even if you’re careful while driving, stuff like pine cones falling, poorly parked cars, or small rocks on the road can still hit your car and cause dents. Paying a pro to fix them can cost a ton, which makes it tempting to just ignore them.
But here’s the thing: small dents aren’t worth stressing over. There are lots of DIY tricks you can try at home to get rid of them. You might be surprised, but things like a plunger, or vacuum cleaner can help. Not every method will work for every dent, though, so you’ll need to figure out which one is best for your car.
Some of the Major Causes of Car Dents
- Car Crashes
- Bad Weather
- Damaged by Kids
- Falling Trees and Leaves
- Road Junk
Before we share some DIY tips to fix dents, you need to understand the basic cause of car dents.
1. Car Crashes
When your car smacks into another, it often leads to some damage. Being super careful while driving is critical here because even if you’re great behind the wheel, lots of stuff on the road can cause a crash. Like someone hitting you from behind, driving while not paying attention, getting bumped while merging, or a side smash. There are tons of ways crashes happen.
2. Bad Weather
Different kinds of crazy weather can mess up your car, no matter where you live. Hail storms are one of the worst. Giant hailstones can leave dents, break windows, and even wreck your engine. You can fix your car with paintless dent repair if it gets damaged.
3. Damaged by Kids
You’ll often see kids playing outside with balls in neighborhoods with lots of families. Sometimes, those balls can hit your car and cause dents. It’s easier to avoid if you park in a garage or find a quieter neighborhood.
4. Falling Trees and Leaves
Leaving your car outside means it’s at risk during storms. Strong winds can knock down trees and smash into your car. Parking in a garage or carport helps prevent this. But if it does happen, you can get help fixing the dents with paintless dent repair.
5. Road Junk
If you drive on highways often, you’ve probably seen bits of stuff on the road, like rubber from burst tires or leftovers from accidents. Sometimes, you can only avoid hitting this stuff if you’re super careful. Defensive driving helps you handle it better if you do.
How to Remove the Dent from Car? [Effective Methods]
Now you know all the causes of why your car gets dented, now it’s time to know how to remove dents from the car. We have mentioned below a few useful methods to remove cars from dents, those kinds of:-
1. Fixing a Dent with a Mallet
Though it might sound odd, you can tap a dent from behind using a mallet. This method is most effective for medium to large dents, but only if you can reach the dent from the back. You must make sure before you hammer the dent, place a cloth over the damage to protect your car’s finish.
2. Hair Dryer and Compressed Air Dent Removal
You can fix dents in your car’s plastic by fixing a hairdryer. It would help if you started by heating the dent with the hairdryer at its highest heat. This will make the plastic part more pliable; this will help the dent to pop back to its original form. This method is generally effective in minor dents.
3. Try the Plunger Method
A plunger might be just what you need for a medium-sized dent. Wet the plunger and the dent, place the plunger over the area, and pull forcefully. If the dent is significant, you may need to pull it from different directions to even it out.
4. Pulling Dent Using a Vacuum Cleaner
A vacuum cleaner can also be used to remove a dent. For this, make a small hole in the bottom of a bucker and create an airtight seal with a vacuum cleaner hose. Close the hole with the tape. Then, place the vacuum over the dent and turn it on to suck the dent out.
5. Affordable Dent-removal Tools
Invest in a dent-removal tool for a cost-effective way to handle small to medium dents yourself. These tools are usually more affordable than professional repair fees and can effectively fix common dents.
6. Using Hot Glue for Dents
You might find it amusing, but hot glue can help you fix dents without impacting your car’s paint. In this process, you need to have some screws, a hot glue gun, and wooden dowels. Drill screws into the dowel ends, apply a bit of hot glue on one side, and then press it against the dent quickly. Once it’s set, you can pull the dowel away to correct the dent.
7. Boiling Water Technique
Pouring boiling water over a dent can help loosen it, making it easier to repair. Ensure you can reach the other side of the dent, pour the boiling water, and then quickly cool it with cold water to help the area reshape faster.
8. See a Professional
If the dent is severe and all the above DIY methods are not working, you should consult a professional. They will ensure that your car gets the proper treatment, saving you time and money in the long run.
Conclusion
Be patient in every instance. Repairing dents requires a series of careful steps. Rushing or exerting excessive force on the metal can lead to unintended stretching, rendering it irreparable—at least without professional intervention. If the damage is severe, you should consider getting expert support to fix the dent.
Frequently Asked Questions (F.A.Qs)
Can I remove a car dent by myself?
Yes minor dents on the car can be removed with certain DIY methods.
Does boiling water pop out dents?
Alone boiling water won’t pop out dents. When you pour hot water on the surface, the body becomes soft and pliable which will remove the dent easily when you pull the dent.
How can I remove a dent at home?
You can invest in the right dent removal kits for small dents. But for bigger dents, we suggest you hire a professional.
How do you use a homemade dent puller?
You have to pour warm water on the dent of the vehicle’s body. After this, the surface will become soft. Then, with a dent puller create a seal and with gentle pressure pull the puller.
0 Comments